BFS Industries

BFS Industries was founded in 1946 by John Garbarino and remains a family owned business today.  Their journey has taken them from modest beginnings in a small fabrication shop in Brooklyn, NY, to expanded facilities on Long Island to their modern, state of the art office and manufacturing plant in Butner, NC. 


Class "S" Deaerator
  • Wide product range from 3,500 #/hr to 500,000 #/hr and higher.
  • Most economically priced unit in the 7,000 #/hr and higher flow range
Request More Information
Class "T" Deaerator
  • Wide product range of 3,500 #/hr to 2,000,000 #/hr and higher.
  • Can handle severe load swings, varying inlet water temperatures and changing operating pressures while maintaining deaeration efficiency.
Request More Information
Class "P" Packed Column Type Deaerator
  • Product range of 200 #/hr to 11,000 #/hr
  • Small boiler applications
  • Efficient at deaerating very low flow rates.
Request More Information
Custom Class Deaerators
  • Any size or configuration
  • Designed from “scratch” in any type or configuration
  • to meet your specific job requirements.
Request More Information

Back to Top

Boiler Feed Systems

Boiler Feed and Condensate Systems
  • Equipped with heavy gauge carbon steel tanks.
  • Standard capacities from 30 gallons to 2000 gallons.
  • Pumps are available in centrifugal or regenerative turbine types and vertical or horizontal configurations to fit your application.
Request More Information
(LPR) Low Profile Round Boiler Feed Systems
  • High quality, low cost solution to your boiler feed requirements.
  • Tanks are constructed of heavy gauge carbon steel, with heavier gauge carbon steel or stainless steel construction also available.
  • The pumps are industrial grade with rugged cast iron casing, bronze impeller, and high temperature seal.
Request More Information
(LPS) Low Profile Square Condensate Systems
  • Lowest possible return inlet and to minimize floor space (they will fit into a corner out of the way)
  • Standard sizes rated from 12,000 sq. ft. EDR to 55,000 sq. ft. EDR
  • pump discharge pressures from 20 psig to 40 psig.
  • Heavy gauge carbon steel, with cast iron also available.
  • Pumps are industrial grade, with rugged cast iron casing, bronze impeller, and high temperature mechanical seal.
Request More Information

Back to Top

Surge Tanks

ZER-O-PAC Surge Systems
  • Eighteen standard sizes
  • Ranging from 3,500 #/hr to 150,000 #/hr
  • Unlimited selection of non-standard sizes and options.
Request More Information

Back to Top

Oil Pumping

Fuel-Pac Type F Fuel Oil Pumping Systems
  • Package "A"
  • Package "B"
  • Package "C"
  • Package "D"
  • Heavy duty, rotary gear type oil pumps for light to medium viscosity oils and screw type pumps for heavy oil applications.
  • Standard system selections from 30 gph to over 3000 gph
  • Discharge pressures up to 150 psig.
  • Higher flows and pressures are available.
Request More Information

Back to Top

Critical Fuel Systems

Fuel-Pac Type D Diesel Oil Pumping and Treating Systems
  • Package "A" and Package "B"
  • Full line of diesel/stand-by fuel oil pumping equipment.
  • Wherever clean fuel is required, such as diesel generators for emergency back-up power, or as a stand-by alternate boiler fuel.
Request More Information
Fuel-Pac Type D Diesel Day Tanks
  • Fuel-Pac day tanks provide a safe and reliable storage solution for your diesel fuel.
  • Heavy gauge carbon steel.
  • Factory tested to insure the highest level of quality.
  • Standard controls include tank level gauge and pump control switch.
  • Rupture basins are available to protect against oil spills.
Request More Information
Fuel Oil Maintenance and Filtration Fuel Maintenance and Filtration Modules will remove the water and treat the fuel to ensure the diesel fuel is ready when you need it. Request More Information
Day Tanks We offer a complete line of day tanks, rupture basins and accessories. Our day tanks are UL listed and tested to meet or exceed industry standards. Request More Information
Pump Sets Critical Fuel Systems manufactures complete, diesel fuel, pump sets for Mission Critical applications. Request More Information
Mission Critical Fuel Control Systems The controls systems for mission critical applications must become more sophisticated as the fuel systems become larger and regulations become tighter. Critical Fuel Systems has engineered a modular control system to meet these challenges Request More Information

Back to Top

Please contact us today. 800-667-1779.

Click here to download our line card