Selkirk

Selkirk Corporation has been a leading manufacturer of chimney, venting and air distribution products for the commercial and residential HVAC and hearth industries for more than 80 years. Selkirk manufactures products in the United States, Canada and Mexico.


Boiler Stacks

Saf-T Vent CI Plus
  • Double Wall
  • AL29-4C® Stainless Steel
  • 4” through 32” diameters
  • AL29-4C® SS inner / 430SS outer
  • Patented Sure Seal closure system
  • 4” – 16” diameters – Factory built-in silicone seal
  • 18” – 32” diameters – Field applied silicone sealant required
  • Tested and Listed to UL 1738/ULC S636 for Category 2, 3, & 4 Appliances
  • Tested and Listed to UL 641/ULC-S609 for L-Vent Gas & Oil Appliances
Request More Information
Saf-T Vent SC
  • Double Wall
  • AL29-4C® Stainless Steel inner liner
  • 409SS outer jacket
  • 3” x 5” and 4” x 7” sizes available
Request More Information
SAF-T VENT GC Saf-T Vent® GC is a single-wall venting system fabricated from AL29-4C® stainless steel. Designed for multiple applications, Saf-T Vent GC can be installed for use as Saf-T Vent Special Gas Vent, Saf-T Vent Gas Vent Connector, and Saf-T Vent Masonry Chimney Liner. Request More Information
Model DF Dual Fuel Piping System Model DF is a Neutral or Negative Draft Venting System for Appliances Burning Gas or #2 Oil. The double wall construction of Model DF includes a Stainless Steel inner liner, 1/2" air space and galvanized outer casing. Model DF is listed for use as a Type B Gas Vent and a Building Heating Appliance Chimney. Request More Information
Model PS / IPS Pressure Stack
  • Chimneys and stacks for Boilers & other types of building heating equipment.
  • Chimneys for industrial ovens, furnaces, and processing equipment.
  • Exhaust piping for engines or turbine units
  • Grease duct in restaurants for compliance with Type 1 hood requirements.
  • Ducting for heated air and combustion products.
  • Ducting for light duty pollution control equipment.
Request More Information
Model G Single Wall Piping System Model G is a single wall negative, neutral, or positive pressure capable, stainless steel pre-fabricated piping system for use in many applications including: grease duct, fume venting, chimney liner, chutes, particle conveying, etc. Model G is UL Listed for grease duct applications. Model G is c-UL Listed as a chimney liner (for existing chimneys) via ULC-S635. Request More Information

Back to Top

Grease Ducts

Model G Single Wall Piping System Model G is a single wall negative, neutral, or positive pressure capable, stainless steel pre-fabricated piping system for use in many applications including: grease duct, fume venting, chimney liner, chutes, particle conveying, etc. Model G is UL Listed for grease duct applications (see our ads). Model G is c-UL Listed as a chimney liner (for existing chimneys) via ULC-S635. Request More Information
Zero Clearance Grease Duct ZeroClear® (IPS-Z3) is an innovative factory-built kitchen grease duct with a zero clearance to combustible rating and integrated chase construction. Request More Information

Back to Top

Engine Exhaust

Engine Exhaust

Please contact us for more information

Request More Information

Back to Top

Engineering & Design Services

Engineering & Design Services Please contact us for more information. Request More Information

Back to Top


Please contact us today. 800-667-1779.

Click here to download our line card