Enervex

PowerStack is a “Universal Venting System”. It is a state-of-the-art, multi-application single or twin-walled exhaust product designed to convey gases, particles, fumes, smoke, grease and products of combustion.

December 28, 2021

Powerstack Chimney & Grease Duct System

PowerStack is a “Universal Venting System”. It is a state-of-the-art, multi-application single or twin-walled exhaust product designed to convey gases, particles, fumes, smoke, grease and products […]
December 28, 2021

RCF Roof Curb

The RCF is a self-flashing type of roof curb and cap designed for use with GSV and EFV models on flat roofs.
December 28, 2021

PLX Plenum Box

Multi-Fan Adapter/Plenum used to provide support for the installation of multiple RSV chimney fans.
December 28, 2021

SCA Steel Chimney Adapter

Adapter used to provide support for the installation of an RSV chimney fan on a round steel chimney.
December 28, 2021

BBF/BBM Balancing Baffle (Flanged/Slip)

Fixed Position Damper used to balance draft in a boiler connector.
December 28, 2021

ADF/ADM Automatic Damper (Flanged/Slip)

The Automatic Damper is an energy-saving device that closes the appliance connector, when the appliance is shut off.
December 28, 2021

MDF Modulating Over-Draft Damper

Modulating Damper used to maintain draft in an individual or common chimney with excessive draft.
December 28, 2021

BDC 26 Redundancy Controller

The Redundancy Controller is used when an option to operate a redundant mechanical draft system is required. It allows the safeties to be bypassed in case […]
December 28, 2021

XTP Differential Pressure Sensor

An external bi-directional pressure transducer for monitoring draft in a chimney or pressure in a duct.
December 28, 2021

OPS Over-Pressure Switch

Provides superior over-pressure draft protection for a boiler.
December 28, 2021

PDS Proven Draft Switch

A fixed set-point differential pressure switch that protects your heating appliances against insufficient draft and unsafe draft conditions during a mechanical or electrical failure.
December 28, 2021

BDC 8 Fan and Damper Control

A simple fan and damper control for gas- and oil-fired boilers and water heaters that maintains a set fan speed where modulation is not required.
December 28, 2021

Edrive E3 MSC E3 Motor Controller

A full featured, industrial-type motor controller for indoor/outdoor use (NEMA 4X) programmed specifically to control and adjust the speed of ENERVEX fans and ventilators using Electronically […]
December 28, 2021

ES12 Relay Box

A flexible, multi-appliance relay control panel that is used to interlock up to 4 appliances. Requires an EBC control.
December 28, 2021

EBC 24X Motor Power Relay

The EBC 24X motor power relay is used in conjunction with a main control panel to operate multiple single-phase intake or exhaust fans.
December 28, 2021

MEC 24 Modulating Pressure Control (Multi-story)

A modulating pressure control that provides superior pressure control in single- or multi-story building applications such as clothes dryers, bathrooms and kitchens.
December 28, 2021

EBC 24 Modulating Fan Control

A safe, efficient, easy set-up draft control solution built for boilers, water heaters, and mechanical rooms. Integrated Modbus protocol.
December 28, 2021

EBC 35 Modulating Pressure Control and CO Monitor

A sophisticated multi-use draft and pressure controller and CO-monitor with integrated webserver and remote access used with fans and dampers to monitor and maintain a constant […]
December 28, 2021

EBC 31 Modulating Pressure Controller

A sophisticated multi-use draft and pressure controller with integrated webserver and remote access used with fans and dampers to monitor and maintain a constant pressure in […]
December 28, 2021

SFTA Air Supply Fan

Tube-axial duct fan used to supply combustion air or make-up air into mechanical rooms.
December 28, 2021

GSV Grease Fan/Pizza Oven Fan

High-temperature grease extraction fan used with kitchen hoods serving grills, wood-fired pits and other extreme applications. For vertical or horizontal termination installation.
December 28, 2021

EFV Rooftop Fan

Multi-use centrifugal exhaust fan designed for outdoor termination installation. Can be used for special exhaust or exhaust of lint-laden air.
December 28, 2021

BEFx Box Fan

Multi-use, high performing, variable-volume centrifugal exhaust box fan designed for indoor and outdoor installation. Can be used for special exhaust or exhaust of lint-laden air or […]
December 28, 2021

BPV Box Power Venter

Box style insulated, high-temperature exhaust fan designed for inline mounting or termination mounting for small and large applications. For vertical or horizontal installation indoors or outdoors.
 

Contact Us Today