For over 37 years, Cannon Boiler Works has been committed to partnering with their customers to help produce the required energy for their needs in the most efficient manner possible, reducing fuel costs and emission of greenhouse gasses. Cannon’s equipment is designed to save up to 15% from a customer’s steam generation fuel bill; while saving fuel, you get the added benefit of reducing emissions in the process.
On Demand Condensing Economizers
- On-Demand operation, only when your system needs hot water
- ROI may be less than 1 year – installed!
- Invisible to boiler system
- Easily inspected and repaired
- Once optimized for your operation, it automatically heat recovers maximum heat
- May boost boiler effiiciency to over 90%
Feed Water Heaters
A unique economizer designed to recover your exhaust stack energy and save you thousands of dollars each year. Cannon Feedwater Heaters pay for themselves by reducing your fuel bills. We will provide you with an estimated payback period when you inquire, and it is normally less than one year.
In application the two are one and the same, since they both recover heat from an exhaust stream and return it to a colder water stream. The difference is the temperature range in which the economizer is operated. Our unit may look identical in outward appearance but can be used in a condensing application if originally design to do so.
Economizers have been proven money saving concepts for nearly 100 years. Now we can extend the efficiency of the traditional rugged Feedwater Heater style economizer, with less impact on your boiler room than the standard installation. Cannon’s On-Demand unit now converts waste gas heat to free energy for your process, with minimal effect on any other piece of equipment in your facility.
Heavy Duty Economizers
Cannon economizers are custom designed for optimal heat recovery and service life for your unique application. Cannon will design your economizer for gas, oil, coal, wood, or special waste gas streams. These units are available in open lattice or bulkhead tubesheet designs, and Cannon manufactures the nickel-brazed helical finned tubes used in all of our economizers.
The vent condenser is a plume abatement device that provides a visual improvement and reduces water/ice or corrosion near the steam vent. Vented steam is directed into the unit and condensed by cold water, and energy is continuously recovered at a rate of 970 BTUs for every pound of steam. This hot water and clean distilled condensate are then ready for use elsewhere in your operation.