Products
Check out our boiler room tips, case studies and resources to maintain your boiler equipment for optimum efficiency, reliability and safety.
August 13, 2019
The Marlo “MRO-4-LP” Series Reverse Osmosis system offers a low pressure, energy saving design for light commercial applications requiring an economical means for high purity water. […]
August 13, 2019
The Marlo “MMB” Series Mixed-Bed Deionizer (MBDI) systems are designed for industrial, ultra-pure water applications where only trace amounts of dissolved solids are allowed.
August 13, 2019
Designed for industrial applications requiring high purity water (98-99% salt rejection). Nominal output capacities of 36,000-432,000 GPD (25-300 GPM).
August 13, 2019
The Marlo “MSB” Series Automatic Separate-Bed Deionizer (DI) systems are engineered to economically produce high purity water through the removal of total dissolved solids (TDS).
August 13, 2019
The Marlo “MPS” Series Transfer Pump Skid is offered to complement our other water treatment equipment to offer you a more integrated system. The standard product […]
March 5, 2025
Hot water or fluid heating 20 – 200 MMBTU/hr Up to 2,300 psig Forced Circulation Available to less than 2 ppm NOx
September 11, 2019
The Clean Steam Generator CSU is used to avoid chemicals normally used in steam water treatment, in steam injection process such as humidification and sterilization. It […]
September 11, 2019
MCU Steam Heat Exchanger: Modulating condensate with a U-tube design Ultimate Package (UP): Includes circulating pumps and accessories Efficient Steam Control: Control valve installed on the […]
January 5, 2022
Maxi-Therm offers a wide range of different steam water heaters based on your requirements, design and application. To save cost and energy the MCU model is a […]
September 14, 2022
Metragator Metal Expansion Joint The Metragator comes standard for movements of 4″, 6″ and 8″. Available in 150 and 300 psi models and can be configured […]
September 15, 2022
Externally pressurized expansion joints with 3″- 4″ of compensation and .5″ of extension. Allows 2″ – 3″ of compression and .5′ of extension on various options. […]
September 15, 2022
Vane Flex Reduces discharge turbulence in a fraction of space Hydrodynamic shaped vanes Protects valves immediately downstream of pump Equals 5-10 pipe diameter turbulence reduction Less […]
September 15, 2022
Available in sizes up to 24″ provides lateral restraint of a piping system, allowing the pipe designer to control pipe movement and prevent bowing or buckling […]
September 15, 2022
Increase equipment performance, remove debris Designed for straight, smooth flow Maximize pump life from iron oxide build-up 2″ – 16″ at 125 psi Steam options up […]
September 15, 2022
Metraflex Wall Penetration Seals create a mechanical water-tight seal, filling the space around any round pipe including: concrete, steel, plastic, cast iron, copper, and electrical conduit. […]
September 14, 2022
The typical Metraloop installation is axial for thermal applications, or in any possible direction for seismic applications – including axial, lateral and angular. Piping systems are used […]
March 24, 2025
5″ to 48″ diameters (ID) in single and double wall for a wide range of commercial applications Insulation options include 1″ air or 1″ – 4″ […]
November 16, 2021
Steam applications 10 to 500 MMBTU Natural gas and propane Available to <7 ppm NOx, <50 ppm CO Supplements turbine in heat recovery steam generator (HRSG) […]
November 17, 2021
Refinery gas, hydrogen, landfill, digester gas, tail gas, or other alternative fuels Stainless steel piping Windbox- or rack-mounted Main and zone trains for multiple burner applications
November 15, 2021
Steam and hot water applications 20 to 400 MMBTU Natural gas, #2 and #6 oil, combination, other Available to <9 ppm NOx, <50 ppm CO Saves […]
November 14, 2021
For new boilers or retrofit applications/hr Natural Gas and light oil firing/hr Millions of configurations possible to satisfy your specific needs Available to < 30 ppm […]
