Products

Check out our boiler room tips, case studies and resources to maintain your boiler equipment for optimum efficiency, reliability and safety.

October 6, 2022

Stratos Pumps

Stratos Maxo Application  Hot Water Heating Systems  Air Conditioning Systems  Closed Cooling Circuits  Industrial Circulation Systems Max. Flow: 280 GPM Max. Head: 52 feet Features & Benefits  EC […]
September 15, 2022

Pipe Guide Anchors

Available in sizes up to 24″ provides lateral restraint of a piping system, allowing the pipe designer to control pipe movement and prevent bowing or buckling […]
September 15, 2022

Wall Penetration Seals

Metraflex Wall Penetration Seals create a mechanical water-tight seal, filling the space around any round pipe including: concrete, steel, plastic, cast iron, copper, and electrical conduit. […]
September 15, 2022

Strainers

Increase equipment performance, remove debris Designed for straight, smooth flow Maximize pump life from iron oxide build-up 2″ – 16″ at 125 psi Steam options up […]
September 15, 2022

Compensators

Externally pressurized expansion joints with 3″- 4″ of compensation and .5″ of extension. Allows 2″ – 3″ of compression and .5′ of extension on various options. […]
September 15, 2022

VRF Expansion Joints

To operate efficiently VRF or VRV* systems are operating at significantly higher pressures than we are used to seeing with Hydronic systems. Test pressures can reach […]
September 15, 2022

Energy Saving Pump Connectors

Vane Flex Reduces discharge turbulence in a fraction of space Hydrodynamic shaped vanes Protects valves immediately downstream of pump Equals 5-10 pipe diameter turbulence reduction Less […]
September 14, 2022

Metraloop

The typical Metraloop installation is axial for thermal applications, or in any possible direction for seismic applications – including axial, lateral and angular.  Piping systems are used […]
September 14, 2022

Rubber Expansion Joints

The Metrasphere is most commonly used as a pump or equipment connector. Reduce noise and vibration Reduce pipe stress on your system Handles movement in all […]
September 14, 2022

Metal Expansion Joints

Metragator Metal Expansion Joint The Metragator comes standard for movements of 4″, 6″ and 8″.  Available in 150 and 300 psi models and can be configured […]
January 4, 2022

CBT Modular Tubeless Boiler

Vertical Tubeless design for reliability and longevity Compact footprint with side-mounted burner Large steam space Up to 50 HP Natural gas, propane 15 or 150 psig […]
January 4, 2022

ClearFire-H Modular Boiler

Steam Boiler 10 to 80 HP Natural gas and propane 15 or 150 psig Standard at less than 20 ppm NOx, less than 10 ppm CO
December 28, 2021

Powerstack Chimney & Grease Duct System

PowerStack is a “Universal Venting System”. It is a state-of-the-art, multi-application single or twin-walled exhaust product designed to convey gases, particles, fumes, smoke, grease and products […]
December 28, 2021

RCF Roof Curb

The RCF is a self-flashing type of roof curb and cap designed for use with GSV and EFV models on flat roofs.
December 28, 2021

PLX Plenum Box

Multi-Fan Adapter/Plenum used to provide support for the installation of multiple RSV chimney fans.
December 28, 2021

SCA Steel Chimney Adapter

Adapter used to provide support for the installation of an RSV chimney fan on a round steel chimney.
December 28, 2021

BBF/BBM Balancing Baffle (Flanged/Slip)

Fixed Position Damper used to balance draft in a boiler connector.
December 28, 2021

ADF/ADM Automatic Damper (Flanged/Slip)

The Automatic Damper is an energy-saving device that closes the appliance connector, when the appliance is shut off.
December 28, 2021

MDF Modulating Over-Draft Damper

Modulating Damper used to maintain draft in an individual or common chimney with excessive draft.
December 28, 2021

BDC 26 Redundancy Controller

The Redundancy Controller is used when an option to operate a redundant mechanical draft system is required. It allows the safeties to be bypassed in case […]
December 28, 2021

XTP Differential Pressure Sensor

An external bi-directional pressure transducer for monitoring draft in a chimney or pressure in a duct.
December 28, 2021

OPS Over-Pressure Switch

Provides superior over-pressure draft protection for a boiler.
December 28, 2021

PDS Proven Draft Switch

A fixed set-point differential pressure switch that protects your heating appliances against insufficient draft and unsafe draft conditions during a mechanical or electrical failure.
December 28, 2021

BDC 8 Fan and Damper Control

A simple fan and damper control for gas- and oil-fired boilers and water heaters that maintains a set fan speed where modulation is not required.
 

Contact Us Today